Jump to: navigation, search


Parade horse regalia, showing a noseband attached to a bridle, an example of a noseband used primarily for style, though it also is the point of attachment for a standing martingale.

A noseband is the part of a horse's bridle that encircles the nose and jaw of the horse. In English riding, where the noseband is separately attached to its own headstall (headpiece), it is often called a cavesson or caveson. In other styles of riding, a simple noseband is sometimes attached directly to the same headstall as the bit.


Development of the noseband

A noseband may have been one of the first tools used by humans to domesticate and ride horses. The bit came slightly later.

The noseband was originally made of leather or rope. After the invention of the bit, the noseband was, in some cultures, demoted to a halter worn beneath the bridle that allowed the rider to remove the bit from the horse's mouth after work and leave a restraining halter on underneath, or to tie the horse by this halter, instead of by the bit, which could result in damage to the horse's mouth if it panicked. However, its ability to hold a horse's mouth shut over the bit was also recognized, as was its usefulness for attaching equipment such as a martingale, and so in some traditions it was sometimes left as a working part of a bridle. Still other cultures, such as that of Ancient Persia, developed the noseband as a tool for training young horses, called a hakma, and this training noseband evolved into modern equipment such as today's bosal-style hackamore and Longeing cavesson.[1]

Uses of the noseband

Today, the noseband has several uses:

  • First, to give a balanced and traditionally correct appearance to the horse's turnout at shows. When raised high, it can make a long-nosed horse's face look shorter and more proportional. Various positions up and down the nose may help the face look more handsome, and a wide noseband can make a heavy head appear more delicate.
  • Second, to keep the horse's mouth closed or at least prevent a horse from evading the bit by opening the mouth too far. It can sometimes prevent the horse from putting its tongue over the bit and avoiding pressure in that manner
  • Third, the noseband is also used to help stop a horse from pulling. A stronger noseband can many times be used instead of a stronger bit, which makes it a valuable option for riders that want more control, but do not want to back their horse off, that is, to make the horse afraid to go forward, especially when jumping, which is often an undesirable consequence when the horse is placed in a strong or harsh bit.
  • It is also valuable for young horses just learning to go "on the bit", as it supports the jaw and helps the horse to relax his masseter, and flex softly at the poll.
  • In some riding styles, a noseband is added simply for decoration and is not attached to the bridle or adjusted to serve any useful purpose.

Nosebands may add some pressure to the nose when the reins are applied, depending on adjustment, style and the degree to which the horse resists the bit. With a soft leather noseband on a well-trained horse, the effect is minimal.

A bridle does not necessarily need a noseband, and many bridles, such as those used in Western riding, flat racing, or endurance riding, do not have one. Some horses shown in-hand do not use a noseband in order to better shows off the animal's head. Many old paintings also depict a hunting horse without a noseband, since it was not always deemed useful by certain riders.

However, even in disciplines such as western riding, where it is considered a sign of a polished horse to not require a noseband or cavesson, one is often used on horses in training as a precaution to help prevent the horse from learning bad habits such as opening the mouth and evading the bit.

Types of nosebands

File:Hunt bridle head.jpg
Classic English style Cavesson Noseband
File:Eventer head.JPG
Figure-eight noseband.
  • Plain or French cavesson: a noseband that encircles the nose 1-2 inches below the cheekbone. This type of noseband is seen in most English disciplines, especially in dressage, show hunters, Saddle seat, equitation and field hunters, but is the basic noseband for all disciplines and so is never an unusual sight. This noseband comes in various styles from a plain flat leather suitable for hunting, to raised, double raised, fancy stitched and padded styles. All of them perform the same purpose.
  • Flash noseband or Aachen noseband: The flash was originally developed for show jumping riders, so they could close the mouth lower down in addition to having an appropriate noseband for a standing martingale. An additional feature of this noseband is that it holds the bit steady in the horse's mouth, which some horses prefer. The noseband is similar to the plain cavesson in that the top part encircles the nose 1-2 inches below the cheekbone, but it also includes a second strap that runs from the cavesson, around the nose in front of the bit and under the chin groove, then coming back around to the cavesson. This second piece is used to help keep the horse's mouth closed and to keep the horse from crossing his jaw. A flash noseband may be used with a standing martingale when the martingale is attached to the cavesson piece. This noseband is usually seen at the lower levels of dressage, or in the dressage phase of eventing.
  • Crank noseband or Swedish Cavesson: used most often on dressage horses at levels where a double bridle is worn, this noseband is similar to the plain cavesson except it is designed to be easy to get very tight, so as to keep the horse's mouth closed. Double bridles cannot use flash or drop cavessons, so the crank is seen on upper level dressage horses who will not keep the mouth shut. It is also used occasionally on show hunters and hunt seat equitation horses. The down side is the horse can't open his jaw at all when the crank is tight, so he cannot relax the jaw and properly move into the bit. Additionally, it can push the cheeks against the horse's teeth when over-tightened, which is painful.
  • Hanoverian: Also called a "crank with flash" this is the same as a flash noseband, but with the addition of a padded jawband like a crank noseband has. It operates to hold the horse's mouth shut and hold the bit steady in the horses' mouth. It is very commonly found on dressage bridles.
  • Figure-eight: Also called a crossed, Grackle or Mexican noseband, this noseband crosses from the top of the ckeekbone on one side, over the nose to the chin groove on the other side, under the horse's chin, and back up to the opposite cheekbone. It is used to remind the horse to keep its mouth closed and prevents him from crossing his jaw, and its design provides more expansion of the nostrils, which is preferable for horses performing work involving galloping (eventing, polo, racing), and has always been popular in show jumping. Many people believe that this type of noseband is more comfortable than a flash.
  • Drop noseband: Invented by the Spanish Riding School, this noseband encircles the nose around the chin groove, as opposed to just below the cheekbone, with the strap on the nasal bone, and never below it. It reminds the horse to keep his mouth closed and prevents the horse from crossing his jaw. Due to its position, it should not be used with a standing martingale. A drop noseband is not as suitable for galloping work as the other nosebands, as it tends to restrict the nostrils if it is fitted incorrectly. Although the drop used to be very popular in dressage, it is very rarely seen today, partly because many riders dislike the look it gives the horse's head. However, most horses prefer the drop noseband to the flash, and it is a very useful piece of equipment.
  • Kineton or Puckle: Originating in horse racing for animals who would be uncontrollable at high speeds, this noseband often cited as being more severe than the others listed above. It works by transferring bit pressure from the rider's hand to the nose. However, it is possible that it may work not because of pain, but because the horse responds better to noseband pressure than to bit pressure (which can be painful and cause the horse to run out of fear). The kineton has metal half-rings that pass under the bit, and a leather strap that sits below the bit and over the nose (which it does not encircle) about where a drop noseband would cross. There is no strap to keep the horse's mouth closed. This noseband should only be used with a snaffle bit (which should be slightly wider than usual to take into account the half-rings), and a martingale should not be attached to the noseband. This is most commonly seen in eventing on the cross-country phase, and in show jumping. This noseband is most suited for horses that are hard pullers, allowing the rider to ride lightly with a mild bit and still stop a strong horse. It is also popular for use on hot horses, to get them to trust the bit and relax.
  • Combination or lever noseband: this noseband has a half-moon piece of metal that goes on each side of the horse's face. On the "top" end of the curve (near the horse's cheek bone), a piece of leather is attached that runs under the jaw and attaches to the other side of the face. At the peak of the curve is a piece of leather that runs over the top of nose in a position slightly lower from where a regular cavesson would cross. At the "bottom" of the curve, a third piece of leather goes under the chin groove of the horse. This noseband is similar in design to the figure-eight, and works similarly by preventing the horse from crossing his jaws (which is especially helped by the metal on either side of the face). Unlike the figure-eight, it does not stabilize the bit and it tends to push the cheeks in against the horse's molars which can be painful.
  • Australian cheeker noseband, "Australian noseband", or "cheeker": this noseband consists of a Y-shaped rubber fork, which is buckled to the center of the poll strap, the forks dropping to either side of the nose, with the ends having round rubber cheek guards that fit over the bit. Used to prevent the bit being pulled through the horse's mouth, as well as to keep the bit raised in the horse's mouth. It is an effective and kind option for a puller or a horse who gets his tongue over the bit. Most commonly seen at the race track.
  • Studded: a studded cavesson has round or sharp studs on the inside. This cavesson is most common in Iberia, especially on young horses, so as not to "spoil" their mouths, and in Austro-Hungaria. They have also been adopted in other disciplines as a means of controlling a difficult horse, or as a training shortcut, but they are generally illegal in most horse show competition. Blunt studs have a relatively mild effect. Sharp studs, like a serrated knife, are extremely painful and can cut the horse. They act with the normal action of the noseband, which applies pressure to the nose when the horse fails to submit to the bit, and increases the effect of this pressure.
File:Encyclopedie volume 3-043.png
Illustration including three serreta nosebands
  • Serreta: One type of noseband integral to a halter or bridle, made of metal and usually with one or three rings protruding outward. Because it is heavy, it commonly is supported with a frentera. The serreta sometimes is studded inside. It is most commonly seen in the Iberian peninsula and Hungary.
File:Lippizaner DSC02450.JPG
A young horse in a longeing cavesson
  • Longeing cavesson (pronounced and sometimes spelled "Lungeing") is a piece of equipment used in longeing a horse, made of leather or nylon web. Though the longeing cavesson looks a bit like a halter, the noseband can be tightened and rings are strategically placed on the sides and at the front of the nose for attachment of a longe line or side reins. It provides much better leverage and more precise control of a horse in ground training, yet it is a relatively gentle piece of equipment.

Fitting the noseband

Different styles of noseband should be fitted according to their purpose. A horse must be able to part its teeth and open its mouth slightly (not visible on the outside) in order to flex correctly at the jaw, relax and come onto the bit. An excessively tight noseband will prevent this. If a horse cannot relax its jaw, it will have problems with proper head carriage, and rider may then try to force the horse into position by pulling back on the reins or using artificial leverage devices.

French or plain cavesson: The headpiece should be adjusted so that the noseband sits roughly equidistant between the prominent cheek bone and the horse's lips. Around the nose and jaw, this cavesson should be fitted so that, depending on the size of the horse and the size of the rider's hand, one or two fingers can be easily inserted between the noseband and the top of the nose. It should not be "cranked" tight.

Drop: This should be fitted on the nasal bone, with the strap and buckle fastening below the bit in the chin groove. Care should be taken not to allow the top part to rest below the nasal bone - if it presses on the soft tissue below this bone it can impede breathing. In general, a drop noseband should not be fitted as tightly, nor should the flash piece of a flash noseband, as the horse's nostrils will be constricted.

Flash: as above, but somewhat tighter to prevent the noseband being pulled down towards the end of the muzzle by the lower flash strap. The lower flash strap runs below the bit and under the chin groove. With the buckle done up, the remainder of the strap should point downwards, not up towards the top of the horse's nose as is often seen.

Crank: Opinions vary on the tightness a noseband should be fitted. Some believe it should be extremely tight, to prevent the horse from opening or crossing its jaws. Others think that the noseband should be more of a reminder to the horse to not open its mouth, should only prevent excessive gaping of the mouth, and that good riding will solve most issues. In this case, a finger should be able to pass between the noseband and the horse at any point.

See also


  1. Bennett, Deb (1998) Conquerors: The Roots of New World Horsemanship. Amigo Publications Inc; 1st edition. ISBN 0-9658533-0-6, pp. 54-55


Premier Equine Classifieds


Subscribe to our newsletter and keep abreast of the latest news, articles and information delivered directly to your inbox.

Did You Know?

Modern horse breeds developed in response to a need for "form to function", the necessity to develop certain physical characteristics in order to perform a certain type of work... More...

The Gypsy Cob was originally bred to be a wagon horse and pulled wagons or caravans known as Vardos; a type of covered wagon that people lived in... More...

Archaeological evidence indicates that the Arabian horse bloodline dates back 4,500 years. Throughout history, Arabian horses spread around the world by both war and trade.... More...

That the term "Sporthorse" is a term used to describe a type of horse rather than any particular breed... More...